For any beginner there are many choices when it comes to deciding on the fabric for a model railway baseboard. For example there is medium denseness fibreboard (MDF), plywood, Sundeala hobby boards, soft panel, molded expanded polystyrene froth (MEPS), extruded expanded polystyrene foam (EXPS) etc. Several are well suited for your model train and in many instances the choice will be on what is available but since you have a choice then which of these would you use for your model train baseboard. rrb bangalore
First of all we have plywood and MEPS. Plywood is an engineered board which is made from thin sheets of woods. The layers are glued together with the grain of every layer at a 90-degree angle to the previous layer. You will normally find an odd number of levels and the outdoors layers both had the grain jogging in the same course to minimise warping. The adhesive used can be quite a chemical derivative and so a face mask should be worn anytime cutting or shaping hdf. MEPS is also an engineered wood product which is formed by digesting softwood into wood fibers. These fibres are coupled with wax and a botanical and then formed into boards. Again the same problem with the possible release of formaldehyde is available when cutting MEPS as with plywood. When it comes to cutting both MEPS and Plywood you will need to purchase power tools such as a drill and a jigsaw. Concerning the model railway baseboard you will find that these products will last will as they are incredibly strong and have no tendency to split or warp but you will need the power tools and probably the products can be heavy if you need to move your model railway baseboard.
Sundeala is a product available in the UK which is becoming popular for Collectors. The boards are made from recycled newspapers and are being used for numerous purposes including displays, white planks, pin boards, packaging and model railway baseboards. These types of baseboards are incredibly soft and is modelled with a strong knife so there is no need for the ability tools but the flip side you made find the fitting of point motors underneath the surface very difficult as there is not much grip and the engines do usually tend to fall off. Soft boards can be categorised with the Sundeala product in respects of the ability to mold it and the appropriate of points underneath. These kinds of products will probably make great model railway baseboards as they are light and straightforward to work with but you may have to deal with having surface installed point motors rather than fitting them under the track.
Particle board (chipboard) is yet another designed wood product created from solid wood particles such as wooden chips, sawmill shavings and sawdust!. A synthetic plant is added and the batch is pressed and then passed through an extruder. The resulting product is cheaper, denser and more uniform that standard wood and plywood even though also being very light. Particle board is the weakest type of dietary fibre board and can be prone to collecting wetness unless properly sealed. If perhaps you are going to use this, therefore, it is necessary that you use a sealant on the plank in order that it reduces warp.